WARNING: This product contains nicotine.
Nicotine is an addictive chemical.

GeekVape Aegis Squonk 100W Starter Kit

Write a review
Sold out
$69.95

GeekVape Aegis Squonk 100W Starter Kit

The GeekVape Aegis The Aegis Squonk Starter Kit is a 100W squonker kit that is designed to be both durable and reliable for on the go applications, featuring military standard 810G-516.6 shockproof system and an IP67 waterproof and dustproof system, and can be powered by using a single high amperage 18650 (sold separately). 

Alongside the Aegis Squonk is the Tengu RDA; a rebuildable dripping atomizer with a 6mm deep e-juice well and bottom feed capabilities. The USB port is safely covered on the side of the device, secured by a thick silicone tab. The batteries are safely secured in with a threaded bottom latch battery door equipped with seal ring to keep it protected from from the elements.

This Squonker rendition of the Aegis mod features the AS-100 Chipset, and a OLED display which shows vape stats including resistance, amps, voltage, puff counter, and battery life indicator.

With the Aegis Squonk is the Tengu RDA; a 24mm diameter atomizer that utilizes a bottom feed system and is able to fit two large clapton coils. E-Liquid can be filled through a top slide to fill port located on the mod which features an easy access silicone plug.

The bottle found in the Aegis Squonk is capable of holding 10ml of E-Juice. Being that this device is made for rough conditions the bottle is secured with the use of 4 hex screws which can be taken out with the included hex tool found within the contents of the packaging. 

The Tengu RDA is also available separately here.

GeekVape Aegis Squonk 100W Starter Kit Features:

  • 5 to 100W Output
  • GeekVape AS-100 Chip
  • Seven Total Output Modes
  • 0.05 to 3.0 ohm Atomizer Resistance Range
  • Temperature Control Suite
  • Ni200 Nickel Support | Titanium Support | SS316 Support | Kanthal Support
  • POWER Support
  • TCR Mode
  • VPC Mode
  • Durable through terrain
  • Military Standard 810G-516.6 Shockproof System
  • IP67 Water Proof and Dustproof System
  • OLED Display
  • Amp Range
  • Output Power
  • Atomizer Resistance
  • Battery Life Indicator
  • Puff Counter
  • Neatly Displayed
  • Brightness Adjustment
  • Increase Brightness
  • Fire Button + Up Button
  • Decrease Brightness
  • Fire Button + Down Button
  • Button Lock
  • Steel Threaded Battery Door
  • Single High Amperage 18650
  • Sold Seperately
  • Zinc, Silicone, and Aluminum Materials
  • Rubber Plugged Micro USB Port
  • 1A Charging and Updating
  • Spring Loaded Gold Plated 510 Connection
  • Powder Coated Stainless Steel
  • Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating
  • Overall Size
  • 86.4mm by 41.2mm by 31.5mm

 

Tengu RDA Features:

  • 24mm Diameter
  • "T" Style Center Post Elevated Side Post Deck
  • Slanted Center for Filling Through Drip Tip
  • Gold Plated "T" Terminals
  • Dual Terminals
  • 3mm by 2mm Per Terminals
  • Coils Held Down by Top Mounted Flathead Screws
  • Elevated Side Terminals
  • Single Terminal Each
  • 3mm by 4mm Per Terminal
  • Coils Held Down By Side Mounted Flathead Screws
  • PEEK Insulator
  • Hidden Squonk Slots on "T" Post
  • Isosceles Trapezoid Honeycomb Style Airflow Design
  • 1mm by 1mm Each Airflow Slot
  • 13 Airflow Slots Total
  • Fully Closeable
  • Notch Assisted Adjustment
  • Gold Plated 510 Contact
  • Squonk 510 Pin Included
  • 810 Drip Tip
  • 10mm Wide Bore PMMA Drip Tip
  • 10mm Wide Bore Delrin Drip Tip

GeekVape Aegis Squonk 100W Starter Kit Includes:

1 x Aegis Squonk Kit
1 x Tengu RDA
1 x 810 Drip Tip
2 x Feather Cotton
1 x Spare Parts Bag
1 x 510 Drip Tip Adapter
2 x N80 Fused Clapton
1 x Gold Plated Positive Pin
1 x GV Triangular Tool
1 x Battery Assist Tool
1 x L Shaped Hex Wrench
1 x USB Cable
Scratch Authenticity Code 

Take a closer look at the GeekVape Aegis Squonk 100W Starter Kit Here: