WARNING: This product contains nicotine.
Nicotine is an addictive chemical.

HohmTech HohmGROWN 26650 Batteries

Write a review
Sold out
$12.95

HohmTech HohmGROWN 26650 Batteries

HohmTech HohmGROWN 26650 Batteries are built specifically for intense & power-hungry 26650 devices that require consistent amperage delivery to operate as intended. Not only was power & capacity a priority, but safety measures were at the forefront of it all.

HohmGROWN 26650 Batteries pack a punch with an impressive 32.3A continuous discharge capacity and a whopping 51.6A pulse, with a long lasting 4307mAh maximum capacity.

Every Hohm Tech battery cell model has been tested and certified by the rightful authorities/laboratories and accredited entities to achieve certification of MSDS, CE, ROHS, UN38.3, Specifications, Air/Sea Transport, and PLI. HohmTech does not cut corners. They deliver what they promise… chart topping performance, capacity, consistency, and safety.

All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr1, TID2, PVDL3, CLR4, mΩR5, and Temperature (°C). 

HohmTech HohmGROWN 26650 Batteries are packaged and sold individually. Larger quantities are available at discounted pricing. Please select your desired pack size from the drop-down menu above. 

HohmTech HohmGROWN 26650 Battery Features:

  • Battery Size: 26650 
  • Battery Dimensions: 26mm x 65.0mm
  • Battery Capacity: 4307mAh 
  • Chemistry Type: Li-ion INR (Li-NiMn)
  • Positive: Flat Top
  • Negative: Unprotected
  • Max Continuous Discharge Rate: 32.3A 
  • Max Pulse Discharge Rate: 51.6A 
  • Max Charge Rate: 4.75A
  • Max Safe Cut-Off: 1.95V
  • Cycle Life Retention: 500 Cycles (81%), 1000 (73%)
  • Can be charged at a tested/proven 4.3A rating: Yes, 4.3, as in FOUR POINT THREE. It is possible, tested, proven, and approved
  • Designed to feed insanely power-hungry devices without having to swap batteries every other minute
  • Mn and Mn inert replaced by additional 1.9% Cobalt (Co) & Nickel (Ni) proprietary levels
  • Exceeds all previous designs and chemistry results with greater amperage and capacity
  • Exceeds all previous designs and chemistry results with greater amperage and capacity
  • Updated Poly Seal: Enhances security of seal & proper operation
  • Ahead of schedule Li-Mn & NiCo chem bonding process
  • NEW Mn bonding process that achieves greater purity: Cycle Life is increased to 80% nominal average of original capacity
  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP) 

To expound on safety:

‌• modified cathode tag consisting of higher purity aluminum is utilized to aid with lowering internal resistance

‌• updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled

‌• each cell is fitted with our proprietary EPTC (Enhanced Positive Thermal Coefficient) ring with higher multiplier of resistance.

‌• every cell equipped with 2-stage CID (Current Interrupt Device) system to aid in overcharge prevention

SAFETY WARNING:
The user must have appropriate understanding of lithium ion batteries before purchase. Use caution when working with and using lithium ion batteries as they are very sensitive to charging characteristics and may explode, burn, or cause a fire if misused or mishandled. Always charge in or on a fire-proof surface. Never leave batteries charging unattended. 

This battery is sold for the use of system integrations with proper protection circuitry or battery packs with a battery management system or PCB (circuit board/module). Buyer is responsible for any damage or injury caused by misuse or mishandling lithium ion batteries and chargers. Charge only with a smart charger designed for this specific type of lithium ion battery.

Misusing or mishandling lithium ion batteries can pose a SERIOUS RISK of personal injury, property damage, or death
BATTERIES MAY EXPLODE, BURN, OR CAUSE A FIRE IF MISUSED OR MISHANDLED
ONLY use with proper protection circuitry
ONLY use within manufacturer specification
DO NOT store loose in pocket, purse, etc. – always use a protective case
KEEP AWAY from metal objects to prevent short circuiting
DO NOT short circuit
DO NOT use if wrapper or insulator is damaged or torn
DO NOT use if damaged in any way
DO NOT overcharge or over-discharge
DO NOT modify, disassemble, puncture, cut, crush, or incinerate
DO NOT expose to liquids or high temperatures
DO NOT solder
User must be familiar with handling lithium ion batteries before purchase
Usage of batteries is AT YOUR OWN RISK

Local regulations and laws pertaining to the recycling and disposal of lithium ion batteries vary so please consult your local jurisdiction regarding appropriate disposal. Many retail stores offer free recycling of rechargeable batteries.